COMMUNITY ENT220 ENTASYS LINE ARRAY+SPEAKER STAND MOUNT GUITAR LIVE SOUND MUSIC
$ 422.4
Description
THIS LISTING IS FOR A COMMUNITY ENT220B LINE ARRAY SPEAKER COLUMN. IT IS ALMOST 65 INCHES TALL AND PRODUCES INCREDIBLE SOUND. THE INPUT IS SPEAKON AND IT CAN HANDLE 500W CONTINUOUS AND 1250W PEAK OUTPUT. THE GRILL HAS A VERY MINOR INDENTATION WHICH IS BARELY NOTICEABLE. THE REST OF THE SPEAKER AND HOUSING IS IN GREAT COSMETIC CONDITION. THIS IS THE LARGEST SPEAKER MADE BY COMMUNITY IN THE ENT/ENTASYS SERIES. I AM INCLUDING THE MOUNTING BRACKET THAT WILL ALLOW THE SPEAKER TO BE MOUNTED ON A TRIPOD SPEAKER STAND. HERE IS SOME INFO AND SPECS FROM THE WEB: PRODUCT DESCRIPTION Community ENT220 2-Way Column Array Speaker - Weather Resistant The Community ENT220 is an all-weather, column line array loudspeaker housed in an attractive, heavy duty extruded PVC enclosure. The largest member of the ENTASYS 200 family, the ENT220 provides exceptional directional control in the vertical axis to tame extremely difficult acoustic environments. With enough power to cover medium and large venues, a system of well-placed ENT220 columns is capable of providing intelligibility and superb musical reproduction, while barely being visible. Noisy environments, excessive reverberation, and other suboptimal acoustical conditions are handled effortlessly by the ENT220. Houses of worship, music venues and corporate AV presentations will benefit from the high performance and versatility of the ENT220. The ENT220 employs twenty high-power LF cone drivers and four Community CRE (Compact Ribbon Emulator) HF tweeter arrays in a single-amped configuration that employs a 5-way frequency shaded crossover. Features Advanced passive crossover technology Dynamic protection circuitry Compact Ribbon Emulator high frequency technology for narrow, well-behaved vertical directivity control All-weather construction for indoor/outdoor usage Selectable low impedance or 70V/100V operation Simple installation using the included pan-tilt mounting bracket Tightly controlled vertical dispersion reduces harmful room reflections Wide horizontal dispersion means fewer units cover a given area Clean, clear and powerful sonic output without the cost of bi-amplification Available in standard black or white finishes, may also be painted to match room décor Specs Loudspeaker Type: Two-way, column array loudspeaker, 8 Ohm or 70V/100V operation Operating Range: 80 Hz - 22 kHz (-10 dB) Frequency Response: 130 Hz to 20 kHz (-3 dB) Max Input Ratings (8 Ohm): 500W continuous, 1250W program, 63 volts RMS, 126 volts momentary peak Autoformer Taps: 70V: 120W, 60W, 30W, 15W, 7.5W 100V: 120W, 60W, 30W, 15W Sensitivity (1W/1m): 97dB (130 Hz - 20 kHz) full space Maximum Output: 124 dB SPL / 130 dB SPL (peak) Nominal Impedance: 8 Ohms Minimum Impedance: 5.6 Ohms @ 320 Hz Vertical Coverage: 15° (2 kHz - 16 kHz +/- 15°) @ 13m Horizontal Coverage: 140° average (1 kHz - 10 kHz +/- 20°) Crossover Frequency: 5000 Hz Recommended Signal Processing: 80 Hz, 24 dB/Oct high pass filter Drivers: LF: (20) 80mm long excursion mylar drivers HF: (4) 3-element Compact Ribbon Emulators Driver Protection: Dynamic protection circuitry Input Connection: NL4 Speakon-type connector for low impedance operation; and 8-position terminal strip for low impedance or constant voltage operation Controls: None Enclosure: Extruded, high gloss paintable PVC Finish: Black or white Grille: Dual-layer powder coated steel, black or white finish Safety Features: Built-in safety eyebolt Environmental: Outdoor Direct Exposure Certified IP54W per IEC529 for UV, moisture and salt spray Required Accessories: High pass filter Supplied Accessories: Pan-tilt bracket accommodating zero to 9° down-tilt and +/- 55° panning; and ABS plastic rain cover with integrated cable inlet and 1" (25.4mm) knockout for conduit ingress Optional Accessories: E200-UMK universal mounting kit E200-SAK stand adapter kit (INCLUDED) Dimensions: Height: 64.6" (1643 mm) Width: 4.62" (117 mm) Depth: 7.47" (189 mm) Weight (without bracket): 41 lbs (18.6 kg)
