666MHz Processor ZYNQ Linux Development Board FPGA Development Board
$ 61.05
Description
666MHz Processor ZYNQ Linux Development Board FPGA Development Board. Processor frequency: 666MHz (XC7Z010), 766MHz (XC7Z020). - Processor model: dual core Cortex-A9. - Lookup table (LUT): 17600 (XC7Z010), 53200 (XC7Z020). - LED: 3 dual-color LEDs, a DONE signal indicator, a USB PHY power enable indicator. Description 666MHz Processor ZYNQ7010 Development Board FPGA Development Board Onboard 0.96-inch OLED for Xilinx Chip Parameters: - Main chip: XC7Z010-CLG400-1 / XC7Z020-CLG400-2 - Processor model: dual core Cortex-A9 - Processor frequency: 666MHz (XC7Z010), 766MHz (XC7Z020) - DDR3(PS): 512MByte, 16-bit wide, 1066M data rate - Logical unit (LC): 28K (XC7Z010), 85K (XC7Z020) - Lookup table (LUT): 17600 (XC7Z010), 53200 (XC7Z020) - DSP unit multiplier: 80 (XC7Z010), 220 (XC7Z020) - Trigger: 35200 (XC7Z010), 106400 (XC7Z020) - RAM: 2.1MBit (XC7Z010), 4.9MBit (XC7Z020) - Speed class: -1 (XC7Z010), -2 (XC7Z020) - Temperature grade: consumer grade (XC7Z010), industrial grade (XC7Z020) Development Board Parameters: - Power supply mode: all TYPE-C ports can supply power. When running Linux alone, please use the DEBUG port for power supply to ensure the stability of the USB. - Development board clock resources: 33.33M (PS), 50M (PL) - Ethernet: Gigabit RTL8211E, one PS ETH0, one PL - Debugger: onboard SMT2 programmer debugger, supporting all development of ARM and FPGA. - Serial port: one PS CH340 serial port - SD card: two PS TF card holders, SD0 support for boot (SD support up to 32G) - HDMI-compatible interface: one HDMI-compatible output, maximum support 1080 at 60Hz. - LED: 3 dual-color LEDs, a DONE signal indicator, a USB PHY power enable indicator - Buttons: two PS buttons and one PL button, one reset button - Start setting switch: a BOOT dial switch used to start setting - Onboard OLED module: 0.96-inch 128x64 mono OLED, SPI interface, based on PL - Onboard FLASH: PS FLASH, W25Q128FVSG, 128Mbit (16Mbytes) - 40-Pins expansion IOs: including 34 single-end IO port, on PL BANK34, 3.3V standard; providing 5V/3.3V external power supply, equal length IO signal. - System reset: one system reset (POR) button - Development board indicator: DONE, USNCPEN, power input indicator - Development board power supply system: Onboard inner-core power supply: 1.0V/6A Others: 1.8V/3A, 1.5V/3A, 3.3V/3A Expansion IO port 40P BANK34 VCCO voltage:3.3V Package Included: - 1 x Development Board - 1 x Type-C Data Cable - 4 x Pair of Nylon Screw Stud - 1 x Acrylic Organic Glass If you need additional products or a larger quantity, please feel free to contact me at any time. I will get in touch with you within the next 24 hours! NOTE: 1.Please check with your country's customs to determine what these additional costs will be prior to bidding/buying. 2.Please leave your valid phone number when you make order, otherwise we can't guarantee the package would arrive smoothly. RETURN: 1.Return accepted in 30 days after you receive the item. The buyer need to affordthe return postage fee who also need to return it to our designated place. 2.Return package must be in the original packaging, item must be in new condition.Missing parts or any damaged by the buyer will not give any return. 3.Within warranty period, all repair parts will be free, but the buyer need to pay for the freight. Your satisfaction is our top priority. Thank you for your positive feedback! Our goal is to consistently provide every customer with the highest quality service and reliable produ cts. However, unexpected si tuations may occasionally arise, and we understand your concerns and frustrations. Before leaving negative feedback, please contact us first to resolve the issue. We will respond to you as soon as possible. We typically assist with resolving issues within 24 hours. Please check your messages, emails, etc. (Note: During weekends and holidays, all inquiries will be responded to on the next business day.)
