1800W DC 10-60V to 12-90V Adjustable Boost Converter Step Up Power Supply Module

Description

1800W DC 10-60V to 12-90V Adjustable Boost Converter Step Up Power Supply Module. Output power: 1800W. The power of the electric vehicle should be less than 500W. Because the electric vehicle motor is an inductive load, the current will be very large during startup and when climbing hills. NEW-00023 STORE PAGES Other Game Accessories Movement And Watch Accessories Motors DJI & RC Headphone Accessories Musical Accessories Health & Beauty Consumer Electronics Home & Garden Toys Office Accessories B & I Military Models Outdoor Sports Pet Goods You may also like You may also like New High Quality Sapphire Watch Glass Replacement Part For Casio MDV-106 22.99 USD 19.99 USD 1/4 Screw Adapter Mount Base With Screws For GoPro Max Hero 10 9 8 Black Camera 9.99 USD 19.99 USD 8 in 1 USB Programming Cable+Software CD For Motorola Baofeng Kenwood HYT Radio 15.95 USD 19.99 USD 6Pack Black Propeller A/B Blades Props CWX3 CCWX3 For Yuneec Typhoon H 480 15.29 USD 19.99 USD Quartz Watch Battery Clamp Replacement Parts For ETA 976.001 Movement 8.04 USD 19.99 USD Watch Movement For Ronda 715 date at 3/6 Position W/Battery&Adjusting Stem 22.03 USD 19.99 USD 1800W DC 10-60V to 12-90V Adjustable Boost Converter Step Up Power Supply Module PRODUCT DESCRIPTION Features: High-Performance Design: Equipped with dual iron-silicon-aluminum four 1.2mm pure copper wires wound in parallel, combined with a 100V/210A low-resistance power MOS, ensuring stable high-power and high-current input, suitable for loads such as high-power LEDs and motors, providing robust power output. Multiple Protection Mechanisms: Built-in input MOS reverse polarity protection, effectively preventing power supply damage due to incorrect input connection, and featuring low-battery protection to safeguard the battery and power module from over-discharge damage. Excellent Thermal Dissipation Performance: Utilizing a thickened heatsink and intelligent temperature-controlled fan, ensuring the power supply operates at low temperatures even under high loads, extending its service life. Versatile Applicability: Supports multiple input and output voltage adjustments, serving as a stabilized power supply, electric bike portable charger, vehicle-mounted power supply, etc., catering to various application scenarios. DIY-Friendly: Easy to assemble and customize, users can DIY high-power laptop portable power banks, solar panel boost and stabilize voltage solutions, etc., according to their own needs, enabling personalized applications. Specifications: Output power: 1800W Input Voltage: DC10-60V Input Current: 35A (10-30V), 30A (31-60V) Quiescent Current: 15mA Output Voltage: Continuously adjustable from 12-90V (Default output is set to 19V) Output Current: 20A MAX (Please enhance cooling if exceeding 15A. It is related to the input and output voltage difference; the larger the difference, the smaller the output current.) Constant Current Range: 0.8-20A (+/-0.3A) Input Reverse Polarity Protection: Yes (150A power MOS protection against reverse connection) Low Battery Protection: Yes (Adjustable from 8-50V) with self-recovery. Operating Temperature: -40~+85°C (Please enhance cooling if the ambient temperature is too high.) Operating Frequency: 150KHz Conversion Efficiency: 92%-97% (Efficiency is related to the input and output voltage, and current difference; smaller voltage differences result in higher efficiency.) Input Overcurrent Protection: Yes (Automatic protection if input exceeds 35A; the power supply will not boost voltage.) Short Circuit Protection: Yes (30A fuse for input) with dual short circuit protection for added safety. Input Reverse Polarity Protection (again): Yes (150A power MOS tube protection against reverse connection; can withstand reverse connection for extended periods.) Wiring Method: Terminal blocks (please use high-current pure copper wires.) NOTE: 1. The output positive and negative terminals cannot be connected reversely or short-circuited. 2. If used as a boost drive power supply for electric vehicles, the input voltage must be above 24V. The power of the electric vehicle should be less than 500W. Because the electric vehicle motor is an inductive load, the current will be very large during startup and when climbing hills. Therefore, sufficient power margin must be reserved. 3. When using batteries, switching power supplies, solar panels, generators, etc., as input sources, the battery protection must be adjusted down; otherwise, it may damage the battery and power supply. 4. Attention should be paid to ventilation and heat dissipation during long-term, high-current, and high-power full-load operation to extend the service life of this power supply. 5. This power supply can only boost voltage and cannot reduce voltage. It cannot supply power to electrical equipment with a voltage lower than the input voltage, such as charging a 12V battery with a 24V battery. 6. Please avoid operating at full load for extended periods. When operating continuously, please leave a 20% margin and ensure proper ventilation and heat dissipation. Package Included: 1 x Power Supply Module Kit Shipping Contact Us Our products have been sent to the US warehouse. All items will be shipped via WINIT CORPORATION. In 2-5 working days, you will receive your items. Thank you and have a nice day. If you have any question about us or items, please contact us, we will reply it as soon as possible. Shipping Our products have been sent to the US warehouse. All items will be shipped via WINIT CORPORATION. In 2-5 working days, you will receive your items. Thank you and have a nice day. Contact Us If you have any question about us or items, please contact us, we will reply it as soon as possible. PaymentShippingReturn policyAbout usContact us Copyright © - Tongtool All rights reserved | Design:Tongtool