Propane Gas Fire Pit Fireplace Safety Valve Control System Kit Assembly - Fla...
$ 23.59
Description
Propane Gas Fire Pit Fireplace Safety Valve Control System Kit Assembly - Fla.... It is suitable for propane gas heaters, fire pit, fireplace. All parts can be directly connected. 【SPECIFICATIONS】Thermocouple with M8 1 threaded head. Bakelite knob OD 38mm, D shaft 6.1mm. Fire pit stainless steel hose is 1/2" OD x 3/8" ID. Package Include: 1 Set Flame Failure Safety Control Valve（gas control valve and thermocouple) 1 × Whistle Free Gas 1 × LP Propane Hose with Regulator Features >Good quality: Made of good grade material. It's durable, sturdy and long lasting. >All parts can be directly connected, CSA approved parts. Installation Install steps: 1. Install the thermocouple tip on a board and use two nuts to fix its location 2. Keep the tip about 5mm from the burner hole. 3. Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread is 8mm before your buying) 4. Connect two flat terminals well with the current tilt switch terminals. 5. Turn on the gas and push your valve 5-10s till the thermocouple end is heated. 6. Release your hand and it work well. If failed, please check a. If your thermocouple is heated on flame b. If the thermocouple end is well connected with valve c. If the terminals connect tilt switch well. Notice >If the fire pit cannot lit, check your igniter and sparker and try to replace one. >Make sure the gas valve is opened before start lighter. >Safety warming: Close the gas if you do not want to use the fire pit for safety. >The air mixer valve and elbows is not included 【PACKAGE INCLUDE】Fireplace parts gas control valve system kit includes gas control valve (maximum BTU level: 50000; working pressure: 65MBAR) and 23.62" thermocouple; One 24" whister free corrugated gas line; One 5FT LP propane hose with regulator. All parts can be directly connected.【SPECIFICATIONS】Thermocouple with M8*1 threaded head. Bakelite knob OD 38mm, D shaft 6.1mm. The gas control valve has 3/8" Flare Inlet & Outlet. The 5FT LP propane hose has QCC-1 tank connections, 3/8-inch flare fitting, 5/8" OD to accommodate for the flare seat. Fire pit stainless steel hose is 1/2" OD x 3/8" ID【MATERIAL & QUALITY】The fire pit gas control system kit is made of brass, plastic, rubber, stainless steel, which make the kit more durable and long-lasting. It's not easy broken and has a good performance of sealing. It's not OEM but the quality is equal to the OEM.【APPLICATION】The kit is used for propane only not suitable for Natural gas and the Max Working pressure cannot be exceed over 1/2PSI. It is suitable for propane gas heaters, fire pit, fireplace. Please notice that don't put the hose close to the cooking area because if exceed the hose working temperature: -22°F~122°F, hose will melt or fire incident.【AND SERVICE】This propane gas kit comes with one year . During six months, you can for or , if the kit failed. Within i year, if products has some problems, you can get partial .
