800W 36-48V DC Motor Speed Controller Scooter Electric Bicycle E-bike Brushless

Description

Features: Advantage of the Controller: Soft Low-Voltage: When the battery voltage become lower, the current will also become lower to keep normal running. It not only protect the battery and extend the battery life, but also increase the running distance. Automatically recognize the motor phase angle and motor right spin direction. It can be conducted by the Self-Study wires. Operation Method: Firstly make sure the battery, Key lock, Motor, throttle are well connected, and also connected the two Self-Study wires. Then open the battery power and key lock, the motor will spin, if the motor spinning direction is correct, please disconnect the two Self-study wires, then study is accomplished. 800W 36-48V DC Motor Speed Controller Scooter Electric Bicycle E-bike Brushless Features: Advantage of the Controller: Soft Low-Voltage: When the battery voltage become lower, the current will also become lower to keep normal running. It not only protect the battery and extend the battery life, but also increase the running distance. Automatically recognize the motor phase angle and motor right spin direction. It can be conducted by the Self-Study wires. Operation Method: Firstly make sure the battery, Key lock, Motor, throttle are well connected, and also connected the two Self-Study wires. Then open the battery power and key lock, the motor will spin, if the motor spinning direction is correct, please disconnect the two Self-study wires, then study is accomplished. If the motor spin direction is reverse, firstly disconnect the Self-study wires, but connect them again at once, then the motor will spin on other direction. When the direction is right, disconnect the Self-Study wires, finished! Start silently, balanced and constant power out-put, Mature Production technical of Controller and authentic quality. Over-heat protection, the controller will cut the power when the temperature is overtop, and restart if the temperature is normal. Intelligent management of battery system, the controller will reasonable control the battery discharge, low-voltage protection function to extend the battery life. Over-load protection. When overload of the bike to make the motor stall more than 2 seconds, the controller will cut off the current out-put to protect the motor and battery Timely control the motor phase current, and protect the MOS Over voltage and low voltage protection Double-Mode, controller can check the motor hall sensor condition automatically. If the motor sensors are broken, controller will operate to None-Hall mode. When the motor phase is failure, controller will protect it, avoid motor burned, and protect the battery at the same time. ★Select the motor speed controller: First look at your e-bike battery voltage levels, corresponding to the selected voltage controller, look at the size of the current controller previously used, such as the 16A-18A 350W controller, 22A-24A controller is 450W, 28A -30A controller is 500W, 31A-33A is 600W controller, 33A-35A is 800W controller, 36A-38A is the 1000W controller, 40A-43A is the 1200W controller, 50A is about 2000W controller. If the original e-bike is 350W we recommend upgrading to a faster wattage, so you can take advantage of the best motor speed and power. Note: this controller only supports three - wire brushless motors and three - wire throttle, not six - wire throttle. Regenerative braking is not supported. Fitment: The battery type can be Lithium battery, Lead Acid battery…. It can be suitable to three - wire throttle brushless DC Hub Motor under 800W Waveform:Square wave Package Includes: 1 x 36-48V 800W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller W/O Product Instruction Item Specifics Brand Rdeluxi Warranty 90 Day Power Source DC Voltage 36V-48V Waveform Square wave Power 800W Feature ESCP MPN R3596340 Payment Feedback * Customer satisfaction is always the first priority for all our staffs! * We sincerely invite all customers to leave positive feedback if you are happy with our products and service. * If there is any problem with the purchase, we are always here to help! * Please give us an opportunity to solve the problem for you, before leaving any negative/ neutral feedback! Warranty * Solve any problems with you in a good way after communication. * High quality products: Each item are checked and tested carefully before shipment * Well-packed parcel: Protect your units with suitable material so as to avoid damage during transit. Contact Us * Contact us Please feel free to contact us through Ebay messages, all messages will be answered less than 24 hours. DESCRIPTION PAYMENT SHIPPING RETURN POLICY Hot Item Male&Female Flat Face Coupler Kit For Bobcat 6679837 6680018 T140-T595 USD 52.09 Chain Tensioner 1-3/4" Roller 196cc Go Kart Mini Bike For Coleman BT200X CT200U USD 9.08 3/4" Bore Centrifugal Clutch For Go Kart Belt Pulley Drive #200182 USD 26.18 New Boat Ladder Stainless Steel Telescoping Folding Dock Ladder 2/3/4/5-Steps USD 62.75 29" 32" 44" Go Kart Rear Live Axle Kit Sprocket+Hub+Brake Assembly+chain+Disc USD 83.82 New List Item Front Seat Covers For Club Car DS 1982-2000.5 Golf Cart Bottom And TWO Backs USD 34.19 40 Series Go Kart Cart Torque Converter Kit For 9-16hp Engines w/ Clutch Pulley USD 158.22 Front Seat Covers Golf Cart Bottom And TWO Backs Fit For Club Car DS 1982-2000.5 USD 34.23 30 Series Torque Converter Belt For Comet 203590A 203590 203590B 203590C Go Kart USD 10.82 Floor Mat Black Factory Size 1015032 For Club Car DS Golf Carts 1982-Up USD 52.00 Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us 800W 36-48V DC Motor Speed Controller Scooter Electric Bicycle E-bike Brushless Features: Advantage of the Controller: Soft Low-Voltage: When the battery voltage become lower, the current will also become lower to keep normal running. It not only protect the battery and extend the battery life, but also increase the running distance. Automatically recognize the motor phase angle and motor right spin direction. It can be conducted by the Self-Study wires. Operation Method: Firstly make sure the battery, Key lock, Motor, throttle are well connected, and also connected the two Self-Study wires. Then open the battery power and key lock, the motor will spin, if the motor spinning direction is correct, please disconnect the two Self-study wires, then study is accomplished. If the motor spin direction is reverse, firstly disconnect the Self-study wires, but connect them again at once, then the motor will spin on other direction. When the direction is right, disconnect the Self-Study wires, finished! Start silently, balanced and constant power out-put, Mature Production technical of Controller and authentic quality. Over-heat protection, the controller will cut the power when the temperature is overtop, and restart if the temperature is normal. Intelligent management of battery system, the controller will reasonable control the battery discharge, low-voltage protection function to extend the battery life. Over-load protection. When overload of the bike to make the motor stall more than 2 seconds, the controller will cut off the current out-put to protect the motor and battery Timely control the motor phase current, and protect the MOS Over voltage and low voltage protection Double-Mode, controller can check the motor hall sensor condition automatically. If the motor sensors are broken, controller will operate to None-Hall mode. When the motor phase is failure, controller will protect it, avoid motor burned, and protect the battery at the same time. ★Select the motor speed controller: First look at your e-bike battery voltage levels, corresponding to the selected voltage controller, look at the size of the current controller previously used, such as the 16A-18A 350W controller, 22A-24A controller is 450W, 28A -30A controller is 500W, 31A-33A is 600W controller, 33A-35A is 800W controller, 36A-38A is the 1000W controller, 40A-43A is the 1200W controller, 50A is about 2000W controller. If the original e-bike is 350W we recommend upgrading to a faster wattage, so you can take advantage of the best motor speed and power. Note: this controller only supports three - wire brushless motors and three - wire throttle, not six - wire throttle. Regenerative braking is not supported. Fitment: The battery type can be Lithium battery, Lead Acid battery…. It can be suitable to three - wire throttle brushless DC Hub Motor under 800W Waveform:Square wave Package Includes: 1 x 36-48V 800W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller W/O Product Instruction Payment Feedback * Customer satisfaction is always the first priority for all our staffs! * We sincerely invite all customers to leave positive feedback if you are happy with our products and service. * If there is any problem with the purchase, we are always here to help! * Please give us an opportunity to solve the problem for you, before leaving any negative/ neutral feedback! Warranty * Solve any problems with you in a good way after communication. * High quality products: Each item are checked and tested carefully before shipment * Well-packed parcel: Protect your units with suitable material so as to avoid damage during transit. Contact Us * Contact us Please feel free to contact us through Ebay messages, all messages will be answered less than 24 hours. All rights reserved. On Mar 11, 2026 at 17:56:49 PDT, seller added the following information: