1314 DrillPump750 - Self Priming Water Pump Attachment for Drills - Water Tra...
$ 11.93
Description
The DrillPump750 is designed to work with most electrical drills with a maximum speed of 2, 800 RPM. This pump is ideal for draining small ponds, fish tanks, small pools or even a flooded basement. The hose connection is 3/4” and uses any standard garden hose. The unit pumps up to 750 gallons per hour and is self-priming up to 12 feet. The 3/8” shank on this unit fits all common chucks for most drills. It is recommended to use silicone grease. To apply, unscrew the side and put a bit of grease on the housing where the rubber fan blades touch, then reassemble. When using, the drill should be set to run forward, turning the pump in a clockwise direction. SELF PRIMING: Pumps up to 750 gallons per hour USABILITY IN MIND: 3/4″ hose connection, for use with standard garden hose UNIVERSAL COMPATIBILITY: 3/8” shank on this unit fits all common chucks Not to be used with potable water Drill Pump will not turn by hand, it must be chucked to the drill Note: After every use apply a small amount of silicone grease. To apply, remove the black housing screws and cover, and put a bit of grease on the housing where the rubber fan blades touch, then reassemble. Do not use spray lubricants.
