6X Oxygen Sensor For Land Rover Range Rover 5.0L V8 Supercharged 2013-18 Up+Down
$ 78.44
Description
6X Oxygen Sensor For Land Rover Range Rover 5.0L V8 Supercharged 2013-18 Up+Down. LAND ROVER. 6p cs x Oxygen Sensor. RANGE ROVER. RANGE ROVER SPORT. If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Product Description Features: Brand New Oxygen Sensor Quality Guaranteed Tested to Meet OE Specifications Better Fuel Economy Placement on Vehicle: Upstream & Downstream Oxygen sensor 4 wire configuration Length : 350mm*4+650mm*2 Direct Plug-In Replacement. Built and tested to strict quality control standards warranty per iod ：3 years Package Include: 6p cs x Oxygen Sensor Interchange For Part Numbe r: 234-5156，234-4791，234-4794 Buil t and tested t o strict quality control standards Fit Vehicle: （Please refer to the compatibility table for details） LAND ROVER RANGE ROVER 3.0L V6 Supercharged 2014 2015 2016 2017 2018 2019 5.0L V8 Supercharged 2013 2014 2015 2016 2017 2018 RANGE ROVER SPORT 3.0L V6 Supercharged 2014 2015 2016 2017 2018 2019 5.0L V8 Supercharged 2014 2015 2016 2017 2018 Must Know Before Buying: The following information is for instructional and guidance reference only. We try and make them as accurate as we can. If Check Engine Light is on or an OBDII Trouble/Fault code occurs after installation, check the sensor with a voltmeter as below. If the sensor is good, further diagnosis is required. There're many different codes for specific functional failures, which are NOT necessarily relevant to the sensor. Find out what the Code means before leaving any feedbacks. Items that have been installed, altered or contaminated are non-returnable. 1. ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty. 2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return. The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered. Q: How do I know the O2 sensor is good or not? A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation. Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
