4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2
4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2

4pc 5x127 to 5x114.3 Wheel Adapters 6061-T6 20mm 5x5 to 5x4.5 1/2" Lug

$ 60.7

Manufacturer Warranty: 1 Year Installation Note: Direct Connect; Modifying Factory Studs Could Be Required Color: Anodized Silver Spacer Thickness: 20mm Placement on Vehicle: Front Axle, Rear Axle Material: High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs Manufacturer Part Number: CV-187-20B-X2-RDX Vehicle Bolt Pattern:: 5x5" (5x127) Manufacturer: RDX Racing Items Included: Wheel Adapters & Nuts Warranty: Twelve-Month Number in Pack: 4 Bolt Pattern: 5x127 (Hub) to 5x114.3 (Wheel) Hub Bore: 71.5mm (Hub) to 56.1mm (Wheel) Other Part Number: Allow 5x5 (Hub) to 5x4.5 (Wheel) Center Bore Size: 71.5mm Type: Wheel Adapter Wheel Bolt Pattern:: 5x4.5" (5x114.3) Brand: RDX Racing Wheel Bolt Pattern: 5x4.5" (5x114.3) Interchange Part Number: Allow 5x127 (Hub) to Use 5x114.3 (Wheel) Thread Size: 1/2"-20 Performance Part: Yes Finish: Anodized Silver Spacer Type: Hubcentric With Wheel Centric Lip

Description

Adapter Thickness: 20mm each side Quantity: 4 Pieces Bolt Pattern: 5x5 to 5x4.5 (5x127 to 5x114.3) Center Bore: 71.5mm to 56.1mm Thread Pitch: 1/2" Adapter Type: Hub Centric w/ Hub Lip This adapter set includes open end lug nuts to secure the adapters onto your factory hubs (Your vehicle may have different thread size than what is supplied with this listing. If your factory thread size is different from 1/2" -To finalize the installation, kindly acquire a compatible set of open-ended lug nuts that match your vehicle's original thread specification. Your Factory wheel studs may extend past the surface of the wheel adapters. In this case you will need to: 1. Adjust the factory studs to a shorter length. 2. Check that the wheels have open slots (cavities) between the fastener holes. 3. Replace the factory studs with a new set of shorter studs.

Related products